01Houston Sleep Health

CPAP Resources.
Everyday Comfort.
Ongoing Support.

Practical help for your CPAP routine—from mask fit and humidity to equipment care and replacement supplies.

Small adjustments. A more comfortable routine.
CPAP equipment ready for a restful night
EVERYDAY COMFORT. CONSISTENT CARE.
02CPAP therapy troubleshooting guide

Find the Issue.
Know Your Next Step.

Open a topic to see possible causes and practical next steps. Your device manual and care team’s instructions guide any adjustments.

Contact our team

What is a DME supplier?

Your durable medical equipment provider helps with masks, supplies, fitting, and equipment service.

Air pressure feels too high or too low

Possible causes

Pressure needs, mask leaks, or comfort settings may need review.

What to do

Contact Houston Sleep Health to review your prescribed settings and treatment data. Do not change clinical pressure settings yourself.

Air from the machine feels too hot

Possible causes

Humidifier or heated-tube settings, a warm room, covered tubing, or a dirty filter may contribute.

What to do

Check user-adjustable temperature settings in your manual, keep the device unobstructed, and inspect the filter. Contact your supplier if the air remains unusually hot.

Air from the machine feels too cold

Possible causes

A cool room or unheated tubing may make the airflow uncomfortable.

What to do

Ask about compatible heated tubing and adjust permitted temperature settings according to your manual. Keep the machine and its air intake uncovered.

Rainout or moisture inside the mask

Possible causes

Humidified air may cool and condense in the tubing; the water chamber may also be overfilled.

What to do

Keep water below the maximum line. Ask your supplier about compatible heated tubing, a suitable hose cover, and humidity or temperature adjustments.

Dry mouth or nose

Possible causes

Airflow, insufficient humidification, or leaks may contribute to dryness.

What to do

Review the humidifier’s user settings and check for leaks. Ask your team about compatible heated tubing and persistent dryness.

Dry mouth while using a nasal mask

Possible causes

Air may escape through your mouth during sleep.

What to do

Ask your equipment supplier to assess mouth leak and mask fit. A different mask style, including a full-face mask, may be appropriate.

Eye irritation

Possible causes

Air leaking upward from the mask may irritate your eyes.

What to do

Refit the mask and adjust headgear gently. Avoid overtightening. Seek advice if irritation continues or you develop eye pain or vision changes.

Mouth opens during sleep

Possible causes

Mouth breathing or leaks can affect treatment comfort.

What to do

Discuss mask options with your supplier. A chinstrap may suit selected patients, but should be assessed by your team rather than used as a universal solution.

Air leaks around the mask

Possible causes

The cushion, mask size, or fit may be incorrect or worn.

What to do

Check fit while lying in your usual sleep position. Ask your DME supplier about refitting or replacing worn components.

Soreness on the forehead or bridge of the nose

Possible causes

An unsuitable mask size or tight headgear may put pressure on the skin.

What to do

Ease overly tight straps and arrange a fit review. Contact your care team for persistent sores or broken skin.

Snoring or daytime sleepiness returns

Possible causes

Leaks, changes in weight or health, or a need to reassess treatment may be contributing.

What to do

Schedule a review with Houston Sleep Health. Bring your device or treatment data as requested. Avoid driving when sleepy.

No pressure or airflow from the machine

Possible causes

A loose power connection, unpowered outlet, disconnected tubing, or equipment fault may be responsible.

What to do

Check the power and tubing connections using your manual. If airflow does not resume, contact your supplier promptly; do not attempt internal repairs.

03CPAP equipment care

Clean Equipment.
A Consistent Routine.

Use your specific manufacturer’s instructions for cleaning, water type, and drying. Some materials, including certain foam cushions, must not be washed like silicone parts.

General cleaning checklist — verify against your product manual
Component Routine Care guidance
Mask cushion or nasal pillows Daily, if washable Wash your face before use. Clean compatible washable parts as directed, rinse, and air-dry. Follow separate instructions for foam cushions.
Humidifier chamber Daily Empty remaining water, clean or wipe as directed, and let dry. Refill with the water type specified by your device; do not exceed the maximum line.
Tubing Usually weekly Clean compatible tubing with the recommended mild cleaner and water. Rinse and allow it to dry fully.
Humidifier chamber Weekly care Follow the manufacturer’s cleaning or descaling method. Use a vinegar solution only if allowed, at the dilution specified for your chamber.
Headgear and mask frame Usually weekly Hand-clean as directed and air-dry. Avoid heat that could damage the material.
Machine exterior Usually weekly Unplug before cleaning and wipe as instructed. Never immerse the machine.
Disposable filter Inspect regularly Do not wash a disposable filter. Replace according to your model’s instructions or sooner if dirty or damaged.
04CPAP resupply

Check the Fit.
Plan for Replacement.

Replacement needs depend on wear, your product instructions, and insurance coverage. The intervals below are planning examples—not a promise of eligibility or automatic replacement.

Replacement intervals to discuss with your supplier
Supply Common planning interval What to confirm
Mask frame or mask system About 3 months Ask which components are included; headgear is often billed separately.
Full-face cushion About 1 month Confirm material-specific replacement instructions and coverage.
Nasal cushion or nasal pillows About 1 month Some plans allow more frequent replacement; verify your allowance.
Headgear and chinstrap About 6 months Replace when fit or elasticity deteriorates, following supplier advice.
Tubing About 3 months Check for holes, loose connections, or damage.
Disposable filters Often monthly Your device may specify a different interval. Confirm filter type.
Water chamber About 6 months Check for cracks, discoloration, or deposits and verify benefits.
05Support that fits your routine

Notice. Check.
Get the Right Help.

You do not have to work through persistent discomfort alone. Share what is happening so your team can help identify the next step.

A CPAP mask fitting and equipment review
  1. 01
    ONGOING SUPPORT / 01

    Describe the concern

    Note when the issue happens, whether it is new, and any changes in symptoms or equipment.

  2. 02
    ONGOING SUPPORT / 02

    Review the basics

    Check fit, connections, water level, and user settings using your device manual. Keep clinical pressure changes with your prescriber.

  3. 03
    ONGOING SUPPORT / 03

    Arrange focused support

    Contact your supplier for equipment or mask concerns and your sleep team for symptoms or treatment review.

06Your questions, answered

Everyday CPAP.
Practical Answers.

Keep your treatment routine informed and supported.

Can I change my prescribed pressure myself?

Ask your sleep team to review the pressure and treatment data. Patient comfort settings differ from clinical pressure settings; follow the instructions for your prescribed device.

Should I tighten my mask to stop every leak?

Overtightening may worsen discomfort and the seal. Ask for a fitting review if gentle adjustments do not resolve leaks.

Do all CPAP parts use the same cleaning method?

No. Materials and device models differ. Follow each product’s instructions rather than applying one cleaning solution or schedule to every part.

Does insurance automatically cover replacements on this schedule?

No. Coverage, quantities, documentation, and replacement eligibility vary. Confirm benefits with your supplier and insurer before ordering.

08Houston Sleep Health

Make Your CPAP Routine
More Comfortable.

Reach out for help with treatment comfort, recurring symptoms, or the right next step for equipment support.

Go Back Top